|
For us, there really is no such thing as a stock plastic PVC core because each application requires something slightly different. This means that we carry some stock of the commonly used DuraCores, but we usually produce to order specifications. We have the capability of turning custom orders very quickly.
We manufacture plastic PVC cores from 1/2" ID and up, at almost any wall thickness, and almost any length. In short, we can run practically any core size that you may need.
A few of our frequently run DuraCores*:
Nominal
Core Size |
ID |
Wall |
OD |
| 2.0" |
2.035 |
0.2325 |
2.500" |
|
| 3.0" |
3.035 |
0.2325" |
3.500" |
| 0.3725" |
3.780" |
| 0.4475" |
3.930" |
|
| 6" |
6.036 |
0.1695" |
6.375" |
| 0.2945" |
6.625" |
| 0.4290" |
6.894" |
|
| 8" |
8.036 |
Please Call |
- - - |
|
| 10" |
10.036 |
Please Call |
- - - |
|
| 12" |
12.032 |
Please Call |
- - - |
*Please note, the above list shows the most frequently requested dimensions. We have the capabilities to create any custom wall from 1/2" all the way up to 14". Please contact us and we will gladly discuss your specific needs.
Please contact us for any of your core requirements, even if the core that you need is not in this range.
|
